Step 1: Network Installation Instructions
A. Please Check to Make Sure That You Have the Following Package Contents:
1. Voip Adapter
2. Ethernet Cable
3. A 5 Volt Power Adapter
B. You Will Also Need:
1. One or Two Analog Touch Tone Telephones (or Fax Machine) Connect the Networked Devices with Ethernet Cables.
2. Power down all the devices you will be networking: Cable/DSL Modem, PC, Voip
Adapter. Connect an Ethernet cable from the Cable or DSL Modem to
the ETHERNET port of the VOIP Adapter. Note: If you are connecting the
VOIP Adapter to a local area or home network, connect an Ethernet cable from
the WAN port of the VOIP Adapter to the LAN port on your network switch/router.
Do not connect the VOIP ADAPTER WAN Port to an Ethernet hub.
Step 2: Telephone / Fax Installation and
Power-UP From the Rear of the VOIP Adapter:
A. Insert a standard RJ-11
telephone cable into the VOIP Adapter PHONE 1 port.
B. Connect the other end of
the cable to an analog telephone or fax machine.
C. Insert a standard RJ-11
telephone cable into the VOIP Adapter PHONE 2 port .
D. Connect the other end
of the cable to an analog telephone or fax machine.
Note: Do not connect RJ-11
telephone cable from the VOIP Adapter to the wall jack to prevent any chance of
connection to the circuit switched telco network. You may now insert the plug
end of the power adapter into a live power outlet which will power up the VOIP
Adapter. At this time, you may now power on the Cable / DSL modem.
For more information please call 1-877-411-5947 |
